CABLES

2CORE3MM - Two Core low voltage 3mm - $1.70 per metre
2CORE5MM - Two Core low voltage 5mm - $3.10 per metre
5CORECABLE - Five Core low voltage 3mm - $2.50 per metre
CAT5 - $0.70 per metre
POWER4CORE - Four Core Flex - 240 volt - $2.60 per metre
LOOPCABLE - Loop Detector Cable - $1.00 per metre
4COREALARM - Four core low voltage - $1.00 per metre

3 PIN PLUG AND LEAD

3 Pin plug and two metres of lead

PLUGLEAD - $8.90

POWER SURGE PROTECTOR AND FILTER

The CM90 is a surge protector and power filter in one. A large number of the hassles we experience with electronic equipment appearing to have a mind of their own is caused by dirty power not to mention the thousands of dollars of damage caused by power surge. The Thor CM90 is one of the best investments you can make in ensuring long trouble free operation of your automatic gates.

CM90 - $389.00

12 VOLT DC POWER SUPPLY

12 volt DC plug pak - 1500ma.

DCPLUGPAK - $38.00

16 VOLT AC POWER SUPPLY

16 volt AC plug pak.

ACPLUGPAK - $32.00

12 VOLT DC POWER SUPPLY WITH BATTERY CHARGER

• Input 240 volts ac
• Output 12 volts DC
• Output current - 3 amps
• Battery charger - 7ah battery
• Strong metal enclosure
• Lockable

PS12VDC3A - $87.00

12 VOLT DC RELAY BOARD

RELAY12 - $24.00

24 VOLT DC RELAY BOARD

RELAY24 - $24.00

7 DAY 24 HOUR TIME SWITCH

This seven day 24 hour time switch is powered by 12 volts and allows you to program up to eight open and close cycles. Being a seven day switch means you can set different times for workdays versus weekends or any other combinations of days you desire.

7DAYTIMER - $44.00

POWER CONVERTOR

36 volt AC or DC to 12 volt Dc convertor.

VSPOWCONV - $41.00

TIMER RELAY BOARD

The Universal Timer Module has been designed to provide eight field programmable functions controlling a SPDT relay from 1 second to 99 days. Powered by 12v DC this unit caters for either positive or negative triggers and incorporates Fail Safe and Fail Secure operation.

Four banks of DIP Switches are provided for programming operation mode.

•One Shot - Applying trigger activates relay for selected time. Trigger input must be removed and reapplied to reactivate.

•One Shot Retriggerable - As for One Shot except where the input is retriggered the timer starts again.

•Strobe Reset - Requires momentary trigger to be applied, relay will activate for preprogrammed time.

•Clutch Relay - Applying trigger voltage causes relay to change state. Remove and reapply trigger forces the relay to change state. No timing function in this mode.

•Programmed Pulse - Applying trigger causes relay to operate for one second at intervals selected on dipswitches. Operation ceases when the trigger is removed.

•Debounce - Applying trigger causes relay to activate for programmed time. Relay remains activated until timeout, regardless of trigger being removed. If input remains triggered after timeout, relay remains activated until trigger is removed.

•Stand Off Timer - Ideal for DOTL alarms. Timing commences when trigger is applied. If trigger is removed before time out, relay will not activate. If trigger remains after time out, relay will activate.

•Fail Secure - The relay does not change state during power failure.

•Fail Safe - The relay is energised when the trigger is not active. Relay will de-energise, releasing power to the door locks during power failure.

TIMERRELAY - $110.00